| Monel K500 Buttweld Fittings |
| Monel K-500 is a nickel-copper super alloy with characteristics and corrosion resistance same as the Monel 400. Due to the addition of aluminum and titanium Monel K-500offers greater strength and hardness than Monel 400. In age-hardened condition, it has greater possibility towards stress corrosion cracking in some environments. |
| Specifications |
Standards |
Monel k500 |
UNS |
N05500 |
Werkstoff Nr. |
2.4375 |
|
| Chemical Composition |
| Monel K500 |
| Ni |
63.0 min |
| Fe |
0.5 – 2 |
| C |
0.25 max |
| Mn |
1.5 max |
| Si |
0.5 max |
| Cu |
27.0 – 33.0 |
| Al |
2.3 – 3.15 |
| Ti |
0.35 – 0.85 |
| S |
0.010 max |
|
| Mechanical & Physical Properties – Monel K500 |
| Density |
8.44 g/cm3 |
| Melting Point |
1350 °C (2460 °F) |
| Tensile Strength |
Psi – 160000 , MPa – 1100 |
| Yield Strength (0.2%Offset) |
Psi – 115000 , MPa – 790 |
| Elongation |
20 % |
|
| Other Products of Monel k500 Buttweld Fittings |
| • Elbows |
• Equal Tee |
• Nipple |
| • Long Radius Elbow |
• Reducing Tee |
• Swage Nipple |
| • Short Radius Elbow |
• Reducer |
• Barrel Nipple |
| • 90 Deg Elbow |
• Concentric Reducer |
• Reducing Nipple |
| • 45 Deg Elbows |
• Eccentric Reducer |
• Bend |
| • 180 Deg Elbow |
• End Cap |
• Long Radius Bend |
| • 1D Elbow |
• Cap |
• Piggable Bend |
| • 3D Elbow |
• Stubend |
|
| • 5D Elbow |
• Long Stubend |
|
| • Tee |
• Short Stubend |
|
|
| |
|
| |
Facebook
Twitter
You Tube
Linkin